玻璃厂超浪费每天产出大量垃圾！他一气之下把垃圾DIY成「超梦幻玻璃碎片台灯」！

他把别人当作垃圾的东西，变成超梦幻逸品！Jackman是一位很厉害的工匠，拥有一间位于吹制玻璃工厂旁的工作室。没想到有天他灵机一动，把人家不要的玻璃残骸做成意想不到的美丽台灯。现在，就让我们来看看整个制造过程吧！首先，把用来作台灯底座的木材锯好。廣告1

February 12, 2017

編輯：宅女貞德

編輯部老人(๑°ｪ°๑)۶ 我宅故我在

艺术, 世界, 小物

他把别人当作垃圾的东西，变成超梦幻逸品！Jackman是一位很厉害的工匠，拥有一间位于吹制玻璃工厂旁的工作室。没想到有天他灵机一动，把人家不要的玻璃残骸做成意想不到的美丽台灯。现在，就让我们来看看整个制造过程吧！

首先，把用来作台灯底座的木材锯好。

First, our builder cut down an old sawhorse he had previously built to serve as the base for the lamps.

廣告1

为了呈现堆叠的效果，他把木板黏合起来。

Wanting to achieve a stacked plywood look, he glued each cut of wood together.

当所有木板都黏好之后，他紧紧地夹紧它们，以胶水密封并确保它们可以快速地干燥。

With everything glued into place, he clamped them tightly to help seal up the glue and ensure a speedy drying time.

廣告2

接着，它把木材裁成台灯底座的尺寸，并用磨砂机磨平它。

After cutting each lamp base down to size, he smoothed them out with a sander.

廣告3

为了装下金属罐，他在每块木板上弄了一个圆形的空间。

To accommodate the mason jars, he cut a circular space in each base where the jars would sit.

他也加了一些接线孔。

He also added holes for the wiring.

以及按开关的地方！

While he was at it, he added a hole for the toggle switch as well.

当所有洞洞的都裁好之后，他决定加一些润滑油。

With all the holes cut out, he decided the bases could use a bit of finish.

为了防止金属罐移动，他加上了盖环。

To prevent the mason jars from moving, he glued the lid rings into place.

为了让光线通过台灯，他在罐盖内切了一个洞。

To help the light pass through the lamp, he cut a hole inside the jar lid.

然后，他为电线弄了一条通道。

He then made a channel for the wire out of an acrylic tube.

把管子放好之后，他开始把色彩缤纷的碎片倒进罐里。

With the tube in place, he began filling the jars with the colorful shards.

弄好后把盖子盖上。

After that, he reattached the lids.

接着，就是发电的零件。

Next up was the electrical component.

廣告4

他先使用工作灯装置，但发现灯泡变得太热了。

He initially decided on a worklight system but found that the lamp was becoming way too warm.

所以决定换成LED灯带。

To solve the problem, he went back to the drawing board and decided that an LED strip would be a better solution.

幸运地，这个新的照明系统不用太多的调整，所以剩下来的任务，就是使用铝板隐藏照明零件。

Thankfully, the new lighting system didn't involve much tweaking to his previous design, so all that was left was to hide the lighting mechanism using a sheet of aluminum.

玻璃碎片台灯就这样完成了！

And then there was light!

廣告

近看是不是更浪漫了？

Who wouldn't want a pair of these epic lamps in every room of the house?

这个DIY真的太神了！小编也好想拥有一个！

让我们来看看影片吧！

订阅我们的Youtube，定时收到最有趣的影片！

来源：Viralnova

接着看贴心男友亲手DIY「自动爱情盒」送女友，打开机关「全部活起来」最美爱情展开！

TEEPR 亮新聞著作權聲明：非法抄襲TEEPR 亮新聞網站請注意，本站所有內容皆由自家TEEPR 亮新聞編輯撰寫，並非如非法內容農場複製貼上。本網站之文字敘述、圖片、影像視聽及其他資訊等，非經授權，不得轉載。如侵權將立刻請臉書封鎖專頁。微改標題、圖片、前段，仍然抓得到！

分類：艺术, 世界, 小物

加入粉絲團！

玻璃厂超浪费每天产出大量垃圾！他一气之下把垃圾DIY成「超梦幻玻璃碎片台灯」！

留言按此

追蹤我們的IG！